The critical measurements in these instructions were extracted from Engineering documents that establish the official criteria for adjustments and settings on the AMAYA embroidery machine. Deviation from these standards is not authorized unless a deviation order signed by Melco Engineering is received. Failure to correctly adjust the settings described in this manual can result in unpredictable behavior of the AMAYA and can cause premature failure of the machine.
In most cases, it is necessary to use the prescribed procedure to measure the settings and adjustments on the AMAYA. Deviation from established procedure or using different methods to do the measurements will often yield different results. In order to obtain consistent measurements, use the procedures described in these instructions.
Use the correct tools and instructions for measurements and adjustments on the AMAYA. The AMAYA is sensitive to incorrect adjustments and is easily damaged when the settings on the machine is not correctly set.
To recommend a change to specifications indicated in these instructions or to change/improve these instructions, send an email to QualityAssurance@melco.com along with full documentation and justification for the change.
These instructions are targeted to trained Melco Field Technicians. The assumption is made that the field technician has received full training in the use of the tools described in these instructions. Therefore, no attempt is made to explain how to use the tools indicated or how to install them on the AMAYA. These instructions also assume that the technician performing these procedures is fully knowledgeable with the AMAYA machine parts and their orientations.