The ink on your garment is wet after printing, be careful not to touch the wet ink or allow the garment to touch the wet ink. This will smear the print.
Once the print job has completed the table will move out to the load position providing you with access to remove the garment. Gently lift the platen frame (if using it) to gain access to the garment. When you remove the garment it is recommended that, with your back to the printer, you grab the garment at the shoulders using two hands and slide it from the printing table in a smooth and even motion to avoid wrinkling or bunching the print.
You should end up with the print on your garment facing you.
