The following fixtures and special tools are required to perform certain procedures and repairs described in this manual:
Fixture, Y-Belt Tensioning (PN: 32108)
Force Gauge (0-40 lbs.) (PN: 995595-01)
Force Gauge (0-10 lbs.) (PN: 995591-01)
Universal Force Gauge Adapter (PN: 32498)
XT Trimmer Home Ficture (PN: 33283)
Head Timing Dial Indicator Gauge (PN: 32453-01)
XT Head Timing Adaptor Fixture (PN: 33065)
3 lb. Weight (PN: 32434)
Hook Retaining Finger Gauge (PN: 009027-01)
Take-Up Lever Timing Fixture (PN: 32413)
Needle Depth Fixture (PN: 32650)
Fixture, Z Home Flag (PN: 32980)
Pin, Gauge, Thread Feed Gear (PN: 32996)
Gauge, Height, Take-Up Lever (PN: 33017)
12 Gram Weight (PN: 10082)
Metric Ruler
Feeler Gauge Set
All of the above fixtures can be ordered through the Melco Parts Department.
It is strongly recommended that the fixtures recommended in this manual are used. Making adjustments without the proper tools and fixtures can result in poor performance or damage to the machine. The AMAYA is dependent on proper maintenance and adjustment in order to produce high quality embroidery.