Design Registration

The Design Registration feature allows you to line up an embroidery design to a mark, such as a stripe, on a garment.

Design Registration Video

 

Perform the following steps to use the Design Registration feature:

  1. Use the Hoop and Arrow key to move the laser to your first reference point (for example, the top of the stripe on the left side).

  2. Press the Laser and Arrow key to confirm this point.

  3. Move the laser with the Hoop and Arrow keys to your second reference point.

  4. Press the Laser and Arrow key to confirm this point.

  5. Press the Laser and Center key. The design aligns to the line created by your two reference points.

The placement of the design along the line depends on the Arrow keys used to input the reference points. The six variations follow:

Design to Left of the Line:

  1. Laser + Left: +

  2. Laser + Right: +

  3. Laser + Center: +

Design in the Center of the Line:

  1. Laser + Left: +

  2. Laser + Left: +

  3. Laser + Center: +

Design to Right of the Line:

  1. Laser + Right: +

  2. Laser + Left: +

  3. Laser + Center: +

Design to Left, Under the Line:

  1. Laser + Right: +

  2. Laser + Left: +

  3. Laser + Center: +

Design in Center, Under the Line:

  1. Laser + Right: +

  2. Laser + Right: +

  3. Laser + Center: +

Design to Right, Under the Line:

  1. Laser + Left: +

  2. Laser + Right: +

  3. Laser + Center: +