Home
Part Replacements
What's New
FAQs
Trouble Shooting Guides
Embroidery Tips
Support Form
Downloads
Search
Contact Us (links)
| |
| B a s i c
M a i n t e n a n c e F o r M e l c
o S e w i n g P e r i p h e r a l s |
2. Lubrication
The Y-Rails
The two Y-carriages are on either side of the beam. You must lubricate the
Y-rails that they ride on. The Y-rails are accessed through the slots on
either side of the beam. Refer to Figure 2-28 for the specific points of
lubrication.
- Insert the tube of the oil bottle into the slot and place 1 to 2 drops
on each side of the Y-carriage, as shown in Figure 2-30.
- Move the beam back and forth a few times to distribute the oil.
Lubricate this area once every 160 machine operating hours.
Figure 2-30
|
