2. Lubrication

 

The Pulley Assembly

Referring to Figure 2-22, proceed with the following steps:

	1. Turn the power switch to OFF.
	2. Remove the X-drive cover.

Figure 2-22

Figure 2-23

Figure 2-24

	3. Move the X-carriage manually all the way to the left.
	4. Insert the tube of the oil bottle through the access hole and place one drop of oil on top of the pulley shaft.

Figure 2-25

Figure 2-26

5. Repeat the procedure for the idler pulley on the right side of the beam assembly (refer to Figure 2-29).