Orientation: Sometimes design orientation must be altered for proper results. To change the orientation, click on the F to the right of Orientation until the desired orientation displays.
Rotate: Positive degree values rotate the element clockwise and negative degree values rotate the element counter-clockwise.
X: This type of movement will move the element to the left or right on the X axis in inch values. Positive values move the element to the right. Negative values move the element to the left.
Y: This type of movement will move the element up or down the Y axis in inch values. Positive values move the element up. Negative values move the element down.
Any time that you are in a property page, you can click "Apply" after making a change and it will immediately apply your change. The advantage of using "Apply" verses clicking "OK" after a change is that you can apply your changes and still move on to making other changes. Once you click on "OK", your changes will be applied and the property dialogues will close and you will be back at the View Window. You can also click "Cancel" and the property dialogues will close without implementing the last change.