The Walk Jump Stitch element is used to position the needle in the hoop without sewing stitches to the new position. The Walk Jump Stitch does not create needle penetrations. The input method is the same as the Walk Stitch element using a combination of straight and curve wireframe points. Left click for straight points, right click for curved points.
The Walk Jump Stitch element is used to manually connect sections of designs and to position the needle outside of the boundaries of the design in order to position material for an applique.
Since Jump Stitch elements consist entirely of expanded jump stitches the "Accumulate jump stitches" field in the design filter should be disabled. If "Accumulate jump stitches" is enabled the Jump Stitch element will be filtered out and the needle will not be positioned correctly in the expanded design.
This is located as a toolbar button, in the Insert Menu and also by right clicking in the View Window. This element is available for EDS IV Summit and Midpoint Product Levels.