Tackle Twill

2" p/n: EDS II - 96491033 DesignShop/ EDS III/ IV - 93391033

4" p/n: EDS II - 96491034 DesignShop/ EDS III/ IV - 93391034

6" p/n: EDS II - 96491035 DesignShop/EDS III/ IV - 93391035

8" p/n: EDS II - 96491036 DesignShop/EDS III/ IV - 93391036

10" p/n: EDS II - 96491037 DesignShop/EDS III/ IV - 93391037

 

  • Set the letter height equivalent to the Tackle Twill alphabet that you are using, i.e. 2.00" letter height when using 2" Tackle Twill.
  • The recommended density for these alphabets is anywhere from 10 points to 20 points. At 20 points the job will sew faster, but you may want less than 2mm between stitches.
  • The 2", 4", and 6" alphabets contain uppercase letters A thru Z and numerals 0 thru 9.
  • The 6" alphabet is a 1 color alphabet; it contains a color change command between the outline stitching and the tack-down stitching.
  • The 8" and 10" alphabets contain numerals 0 thru 9 only.
  • The 2", 4" 8" and 10" alphabets contain 3 color change commands: 1 between the outside outline and the outside tack-down; 1 between the outside tack-down and the inside outline; and 1 between the inside outline and the inside tack-down.

 

Steps:

  1. An outline walkstitch sews first then a color change command (machine will stop).
  2. Use kk-100 spray adhesive to glue material down, using the outline as a guide.
  3. Press START and the machine will sew the tack-down stitch around the base material. The machine will stop when this stitching is done. The 6" alphabet will be done at this point.
  4. Press START and the machine will sew the outline stitch for the top material. The machine will stop when this outline stitch is done.
  5. Use kk-100 spray adhesive to glue the top material down, using the outline as a guide.
  6. Press START and the machine will sew the tack-down stitch around the top material.

MAIN INDEX